2011 Benelli Tre 1130K
FUEL SUPPLY Electronic injection with three throttle bodies ø53 mm - EXHAUST SYSTEM With catalytic converter and oxigen sensor
TRE 1130 K is proposed in grey with mat titanium frame and renewed with the following components: MARZOCCHI forks with with oxydation of the fork sliders, totally adjustable in extension, compression and preload spring on both sliders; Radial front calipers BREMBO; Incresed size of the seat allowing a much more comfortable riding position especially over long road journeys; The finishing of the rims is now metal grey; The hydraulic clutch command; Availability: March 2011 Colours: Grey
2011 Benelli Tre 1130K
Specifications
ENGINE
TYPE
In line 3 cylinders, 4-stroke, liquid cooled , 4 valves per cylinder double
overhead camshaft, with balancer shaft
DISPLACEMENT
1131 c.c.
BORE x STROKE
88 x 62 mm
COMPRESSION RATIO
11,6:1
RATED OUTPUT
92 kW (123,4 cv) @ 9000 rpm
MAX. TORQUE
112 Nm (11.4 kgm) @ 5000 rpm
LUBRICATION Wet sump
OIL CAPACITY
4 lt
FUEL SUPPLY Electronic injection with three throttle bodies ø53 mm
EXHAUST SYSTEM With catalytic converter and oxigen sensor
CERTIFICATION
CLUTCH Dry clutch with hydraulic command with slipper device
GEARBOX 6 speeds
PRIMARY DRIVE
44/79
GEAR RATIO
1° – 14/39
2° - 18/35
3° - 21/32
4° - 23/30
5° - 24/28
6° - 26/27
FINAL DRIVE Chain drive, ratio 16:34
ELECTRIC EQUIPMENT
IGNITION
WALBRO ECUA-1
SPARK PLUG
NGK CR9E
STARTING ELECTRIC
CHASSIS
FRAME Decomposable, front steel trestle, rear alluminium alloy casting
FRONT SUSPENSION
Ø50 mm upside-down fork, with idraulic extension / compression and
spring preload adjustments
FRONT SUSPENSION STROKE
ANTERIORE 150 mm
REAR SUSPENSION
Steel tube trestle swingarm, rear dumper with idraulic adjustment
(extension, high and low speed compression) and spring preload
assembled with progressive link
REAR SUSPENSION STROKE
POSTERIORE 144 mm
FRONT BRAKE Twin floating disk ø320 mm with radial 4 piston calipers
REAR BRAKE Singol disk ø240 mm with double piston caliper
FRONT RIM TYPE Alluminium alloy
FRONT RIM DIMENSIONS
17”x3.50” DOT-D
REAR RIM TYPE Alluminium alloy
REAR RIM DIMENSION
POSTERIORE 17”x6.00” DOT-D
FRONT TYRE
120/70-ZR17
REAR TYRE
180/55-ZR17 (190/50-ZR17)
DIMENSIONS
LENGHT
2168 mm
WIDTH EXCLUDING MIRRORS
875 mm
HEIGHT EXCLUDING MIRRORS
1255 mm
SEAT HEIGHT
850 mm
WHEELBASE
1493 mm
GROUND CLEARANCE**
140 mm
TRAIL
N.D.
STEERING PIPE ANGLE
N.D.
UNLADEN WEIGHT*
215 kg
ROAD READY WEIGHT**
240 kg
PERMITTED TOTAL WEIGHT
440 kg
USABLE TANK VOLUME
22 lt
RESERVE
4 lt
* without fluids
** According to guideline 93/93/CEE with all fluids, fuelled with at least 90%
of usable tank volume
2011 Benelli Tre 1130K
Specifications
ENGINE
TYPE
In line 3 cylinders, 4-stroke, liquid cooled , 4 valves per cylinder double
overhead camshaft, with balancer shaft
DISPLACEMENT
1131 c.c.
BORE x STROKE
88 x 62 mm
COMPRESSION RATIO
11,6:1
RATED OUTPUT
92 kW (123,4 cv) @ 9000 rpm
MAX. TORQUE
112 Nm (11.4 kgm) @ 5000 rpm
LUBRICATION Wet sump
OIL CAPACITY
4 lt
FUEL SUPPLY Electronic injection with three throttle bodies ø53 mm
EXHAUST SYSTEM With catalytic converter and oxigen sensor
CERTIFICATION
CLUTCH Dry clutch with hydraulic command with slipper device
GEARBOX 6 speeds
PRIMARY DRIVE
44/79
GEAR RATIO
1° – 14/39
2° - 18/35
3° - 21/32
4° - 23/30
5° - 24/28
6° - 26/27
FINAL DRIVE Chain drive, ratio 16:34
ELECTRIC EQUIPMENT
IGNITION
WALBRO ECUA-1
SPARK PLUG
NGK CR9E
STARTING ELECTRIC
CHASSIS
FRAME Decomposable, front steel trestle, rear alluminium alloy casting
FRONT SUSPENSION
Ø50 mm upside-down fork, with idraulic extension / compression and
spring preload adjustments
FRONT SUSPENSION STROKE
ANTERIORE 150 mm
REAR SUSPENSION
Steel tube trestle swingarm, rear dumper with idraulic adjustment
(extension, high and low speed compression) and spring preload
assembled with progressive link
REAR SUSPENSION STROKE
POSTERIORE 144 mm
FRONT BRAKE Twin floating disk ø320 mm with radial 4 piston calipers
REAR BRAKE Singol disk ø240 mm with double piston caliper
FRONT RIM TYPE Alluminium alloy
FRONT RIM DIMENSIONS
17”x3.50” DOT-D
REAR RIM TYPE Alluminium alloy
REAR RIM DIMENSION
POSTERIORE 17”x6.00” DOT-D
FRONT TYRE
120/70-ZR17
REAR TYRE
180/55-ZR17 (190/50-ZR17)
DIMENSIONS
LENGHT
2168 mm
WIDTH EXCLUDING MIRRORS
875 mm
HEIGHT EXCLUDING MIRRORS
1255 mm
SEAT HEIGHT
850 mm
WHEELBASE
1493 mm
GROUND CLEARANCE**
140 mm
TRAIL
N.D.
STEERING PIPE ANGLE
N.D.
UNLADEN WEIGHT*
215 kg
ROAD READY WEIGHT**
240 kg
PERMITTED TOTAL WEIGHT
440 kg
USABLE TANK VOLUME
22 lt
RESERVE
4 lt
* without fluids
** According to guideline 93/93/CEE with all fluids, fuelled with at least 90%
of usable tank volume
Auto Insurance Information
www.statefarm.com
State Farm® has offered motorcycle insurance for 40 years
Protection for the Open Road The open road is always an adventure. You never know what might be around the bend. So make sure you're prepared for whatever the road has in store for you, with a State Farm motorcycle insurance policy. Motorcycles Covered by State Farm We will consider any factory-built motorcycle, motorscooter, and other two or three-wheel vehicles including minibikes and trail bikes licensed for use on public roads. Available Coverage Options = Bodily injury to someone else or property damage that you accidentally caused while riding your motorcycle. = = Bodily injury to yourself because of an accident with an uninsured motorist. = = Damage to your motorcycle caused by an accident. = = Theft, fire, vandalism, and other losses even while your motorcycle is in storage for the winter. = = Customization work, such as paint or upgraded components = = Attached side cars. = Note: This is only a general description of available coverages and is not a statement of contract. All coverages are subject to policy provisions and applicable endorsements. For further information on motorcycle insurance see a State Farm Agent. |
No comments:
Post a Comment