2012 Husqvarna TE310
The winning choice of Antoine Meo
Derived straight from the TE250 platform, the 310 is bored and stroked to 302cc, producing robust torque while also retaining the light weight and agility of a quarter-liter bike. New Leo Vince exhaust improves power output on the fuel-injected motor of the TE310, which also remains street legal for the enthusiast looking for a hard-core off-road bike with a license plate.
2012 Husqvarna TE310 Review
A choice of weapon you wouldn't expect, and the one chosen by Antoine Meo. The French champion chose the Husqvarna TE310 to contest the E2 enduro category, against competitors racing with significantly more powerful engines (up to 450 cc). A courageous choice that is already becoming racing legend, and explained by the effectiveness of a rare balance of performance, weight and manoeuvrability. Just as suitable for the passionate amateur racer in challenges among friends, as it is for the wily and determined Husqvarna team champion.
HUSQVARNA TE449,TE511,TC449 A NEW BREED
Husqvarna has always strived to innovate and bring new ideas to the world of off road motorcycles. Now, as always, the motorcycle brand with the longest tradition in the world in the Off Road sector is fully committed to the ongoing research and development of the perfect off road bike: easy to use, ready to race and easy to maintain.
The design of the new 449/511 range outstrips that of other off road models and stands out immediately for its looks, exclusive layout and cutting-edge technology.
TE449/TE511 DESIGN AND LAYOUT
The line is completely new: slim, svelte and refined. The single piece side panel runs from where traditionally the fuel tank would be, all the way back to the rear mudguard, allowing the rider free and unhindered movement. There is no chance of snagging boots or jeans on the edges of the panels with this design.
Besides the aesthetic and ergonomic aspects, the new design also makes maintenance easier as the air filter, rear shock and throttle body can all be accessed with ease. The long seat, which runs from the rear mudguard to the steering head, offers completely free longitudinal movement.
Aesthetics, technology and serviceability too: the graphics on the side panels are applied using the ‘In Mould Design’ technology for increased resistance to wear and the 2 litre fuel pump housing is transparent so that the remaining fuel level can be easily monitored.
MASSES AND CENTER OF GRAVITY
The idea behind the TE 449/511 range is ‘mass centralisation’ – to keep the weight of the bike concentrated as close as possible to the centre of gravity and to design a chassis which adapts perfectly to the demands of competitive Enduro racing. The crux of this concept is the union of the rear wheel swing arm pivot point and the gearbox output shaft sprocket. This solution, which Husqvarna calls CTS (Coaxial Traction System), eliminates the variation in the length of the chain during rear suspension movement, minimising the effect of the final drive on the bikes handling.
This solution allows a longer swing arm whilst still retaining a wheelbase similar to our competitors, ensuing greater traction, which for Enduro means tangible advantages.
The chassis layout allows the modern DOHC engine to be mounted closer to the centre of the bike, whilst tilting the cylinder further forward allows a long and straight air intake path at the same time as keeping the centre of gravity as low as possible. This has also meant that the throttle body and fuel injector nozzle can be mounted in the ideal position.
Again, continuing the theme of mass centralisation, the two part fuel tank design provides a total of 8.5 litres capacity in a low mounted 2 litre pump housing and a 6,5 litre under seat main tank.
The under seat fuel tank layout permits the airbox to be located in a protected and fluidodynamically favourable position above the engine with the actual air intake being at the height of the steering column, in a raised and sheltered position to minimise the intake of dust or water.
The air filter box has an elongated intake manifold and a newly designed air intake to provide greater breathability for the sponge filter, which is easily removed thanks to a hinge system in the airbox.
The battery is located adjacent to the under seat main fuel tank to again centralise the mass.
The TE 449/511 bikes are equipped with a cutting-edge 4 valve dual camshaft engine which has been significantly improved thanks to the experience gained by Husqvarna in its many years of offroad racing.
Fuel delivery is managed by an electronic injection system with a Keihin 46 mm diameter, double flap throttle body which provides progressive and predictable throttle response. All components are top of the range - the bike even comes with two exhaust silencers: the Euro 3 compliant silencer fitted as standard and a steel Akrapovic Racing exhaust, developed in collaboration with the Slovenian company to maximise the potential of the engine, whilst minimising the weight.
The gear ratios for both the Enduro and MX versions have been completely changed: the Enduro now uses a 6 speed transmission and the ratios have been modified on the basis of the experience gained during Salminen and Tarkkala's races. The ignition timing has been optimised with maps specific to the two different capacities and exhaust systems.
The TE 511 version has been achieved by increasing the cylinder bore from 98 mm to 101 mm, with the stroke remaining at 59.6 mm. The effective displacement has therefore been increased to 478cc.
The clutch is controlled hydraulically, offering a smoother and more progressive action with greater consistency also under stress.
The motorcycle has a high energy electronic ignition and, thanks to the powerful battery and fuel injection system, a supplementary kick start is not necessary.
HANDLING AND PERFORMANCE
Naturally, Husqvarna's long experience in Enduro racing has played an important part in the development of these new motorcycles. The challenges posed by the conception of geometry and by the general concept of the motorcycle itself were linked to the tough demands of riding in the most severe and extreme conditions. The result is a surprisingly effortless and smooth ride along with agility and outstanding steering stability.
The perimeter design chassis is made of high strength steel tubing. The geometry of the rear suspension is revolutionary, with a new linkage mounted on top of the alloy swing arm.
This solution offers many advantages: it increases the ground clearance, improves general reliability thanks to the reduced exposure of the components and makes maintenance easier.
But there's more: dynamically, by exploiting the advantages of the double cradle frame made in high strength steel tubing, the roughness of the ground is absorbed more gradually, attenuating the stresses on the rider.
The advantages when jumping are also remarkable with the recoil effect of the rear wheel being significantly reduced and the smoothness of the suspension is particularly perceivable on rougher and more difficult ground.
COAXIAL TRACTION SYSTEM
A real refinement in the field of chassis design and exclusive to the TE/TC 449/511 range is the CTS, the Coaxial Traction System. This system represents an evolution compared to the one adopted on the BMW G 450X. The solution, which originally used a single swing arm pivot spindle, now has two independent semi spindles which reduce the stress on the swing arm and facilitate the replacement of the gearbox sprocket.
The advantages of the CTS system compared to the traditional systems are huge. During the suspension movement along the whole stroke, the chain is not subject to any change in length.
The tension of the chain remains constant regardless of the swing arm position, while the chain and sprockets benefit from reduced wear. An important positive effect on the riding characteristics is the marked reduction of the impact of alternating the load on the transmission.
This aspect has been studied by a spin-off company of the University of Padova called Dynamotion which has proved that the CTS improves traction in the various stages of acceleration and consequently during also the vertical movements of the suspension on rough terrain.
The result is better traction during acceleration and surer, more confident gear changes. More in general, the values obtained by adopting the CTS have a much more uniform trend in all conditions, leading to improved ridability and stability of the motorcycle.
TOP OF THE RANGE COMPONENTS
The new TEs are equipped with the most advanced components in the Off Road sector.
For the front brake, there is a Brembo system with floating caliper and 260 mm wave rotor, while the rear brake consists of a floating calliper operating on a 240 mm rotor.
The suspension is entrusted in full to the specialists of Kayaba, with 48 mm forks, adjustable for compression and rebound damping and a Kayaba rear shock absorber designed specifically for Enduro use with settings optimised in collaboration with the racing team.
The tapered diameter handlebars, original equipment hand protectors, compact and efficient instrumentation, shockproof plastic engine / chassis guards, rear mudguard with incorporated racing number plate holder and led rear light complete the fittings.
TE449/511 are also the sole standard enduro bike on the market equipped with full Akrapovic exhaust system.
A range of Husqvarna Special Parts will be available, developed by Husqvarna to provide the best combination of lightness, durability and performance to allow Husqvarna fans to personalise their bikes and offer them the ingredients for racing success.
The motorcross version stands out not only for the normal MX chassis changes (no lights, 19" rear wheel etc) but above all for the engine which has been specifically tuned for MX use, delivering significantly more power than the Enduro version.
The timing and camshaft profiles are completely different as is the compression ratio which has increased to 13:1 instead of 12:1 in the Enduro version. The electronic injection system still uses a 46mm Keihin throttle body but is fitted with a single flap instead of the Enduro twin flap version to provide a sharper, more aggressive throttle response. Additionally, the TC449 is fitted with a dual mode switch on the handlebars, which allows access to two different fuel injection / ignition timing maps to provide a softer power delivery for low traction conditions.
The titanium exhaust system with carbon fibre tipped silencer has been developed specifically by Akrapovic and the five speed transmission has specific ratios for use in MX. The suspension is provided by Kayaba with multi adjustable sealed cartridge front forks matched to a Kayaba fully adjustable rear shock.
2012 Husqvarna TE310 Features and Benefits
The completely new TE 310 has been based on the World Championship Winning TE 250. The perfect mix of lightweight agility and the extra power of a 302cc engine. Know your limits? Think again...
302cc engine with significantly higher torque and power
EFI with 45mm Mikuni throttle body
Extremely lightweight (-6kg compared to the 2010 model)
New Kayaba forks
New Fuel Tank 8.5L
Updated Frame with Forged Sections
Double Map Switch on Handlebar
To improve stability and manoeuvrability the TE310 has a new rear Kayaba shock, adjustable for both high and low speeds in both compression and rebound and a more rigid setting for the Kayaba 48 mm fork.
The best of all worlds
The engine is directly derived from the little beauty developed for the TE250 ? the lightest in its category at just 22 kg! But its compactness now has greater torque and power with an increase in cylinder capacity to 302.4 cc (bore and stroke 82 x 57.35 mm), and a specially new developed exhaust system to further improve performance of the 2012 version TE310. The basic design is unchanged: single cylinder, twin cam, with 4 titanium valves, Mikuni electronic injection with 45 mm throttle body and double CDI mapping, selectable by a switch on the handlebars.
The classic allure of black
The compact frame, a mixture of round, oval and rectangular tubing, was already modified in last year's model, and has been fine-tuned to further improve strength and rigidity, with plates of 25CrMo4 chrome-moly steel added to the steering-head area. This important change is emphasized by the new black colouring, the anodised silver Excel hubs, and the new graphics that are common across the Husqvarna 2012 range.
2012 Husqvarna TE310
North American Specifications
MSRP Price: $8,199 USD
Wheelbase: 57.87 in.
Overall Length: 88.98 in.
Overall Width: 32.28 in.
Seat Height: 37.4 in.
Rake: 26.5 degrees
Trail: 4.17 in.
Ground Clearance: 11.42 in.
Curb Weight (no gas): 247 lbs.
Fuel Capacity: 2.25 gallons
Oil Capacity: 0.95 quart
Chromoly single tube frame cradle utilizes rounded-rectangle, elliptical tubing for maximum strength and durability.
FORK – Kayaba 48mm open-cartridge fork featuring 11.8 inches of front wheel travel. Upside down telescopic fork features fully-adjustable compression and rebound damping.
SHOCK – Kayaba Progressive "Soft Damp" hydraulic single shock with 11.6 inches of travel. Features adjustable spring preload and fully-adjustable rebound and dual (high/low-speed) compression damping.
Front: Braking 260mm wave rotor, Brembo dual-piston floating caliper; Hydraulic actuation.
Rear: Braking 240mm wave rotor, Brembo single-piston floating caliper; Hydraulic actuation.
Front: 1.60/21 Excel rim, 90/90-21
Rear: 2.15/18 Excel rim, 140/90-18
Battery: 12 V-7Ah
Head Light: 35 W
Pilot Light: 5 W
Tail Light: LED type
Turn Signals: 10 W
Type: Single-cylinder, dual overhead cam (DOHC) four-stroke
Head: 4 titanium valves in radial arrangement operated by DOHC
Bore x Stroke: 82 x 57.35mm
Compression Ratio: 13:1
Starting: Electric and kick start
Clutch: Wet, multi-plate with hydraulic control
Cooling: Liquid, 2 radiators with electric fan
IGNITION: Electronic with adjustable advance
FUEL SYSTEM: EFI with Mikuni D45 throttle body
LUBRICATION: Dry sump with two oil pump rotor, cartridge filter
TRANSMISSION: 6 speed
2012 Husqvarna TE310
AU MSRP Price: See dealer for pricing.
Type Single cylinder, 4-stroke, DOHC, 4 valve
Bore 83.0 mm
Stroke 55.0 mm
Displacement 297.6 cc
Compression ratio 13 : 1
Starting Electric and kick
Lubrication Dry sump with two oil pump rotors and cartridge filter
Ignition C.D.I. electronic, with adjustable advance
Spark plug type NGK CR 9EB
Spark plug gap 0.7 mm
Fuel systen Electronic injection feed, throttle body MIKUNI D45
Clutch Wet, multi-plate type, hydraulic control
Driving disc number 7
Driven disc number 6
Type Steel single tube cradle with steel round tubes; light alloy rear frame
Front suspension Kayaba Upside-Down" telescopic hydraulic fork with advanced axle; compression and rebound stroke adjustment
Fork leg diameter 48 mm
Fork travel 300 mm
Rear suspension Progressive "Soft Damp" type with single hydraulic shock absorber; spring preload adjustment, compression and rebound adjustment (compression stroke: double adjustment)
Rear wheel travel 296 mm
Front brake 260 mm BREMBO fixed disc "wave" type with hydraulic control and floating caliper
Rear brake 240 mm BREMBO floating disc "wave" type with hydraulic control and floating caliper
Rim front 1.60" x 21", light alloy
Rim rear 2.15" x 18", light alloy
Tyre front 90/90-21" MICHELIN Enduro Competition 3
Tyre rear 140/80-18" MICHELIN Enduro Competition 3
2012 Husqvarna TE310
MSRP Price: See dealer for pricing.
Dimensions, weight, capacities
Min. ground clearance11.42in
Kerb weight, without fuel233.69lb / 106kg
Fuel tank capacityU.S. Gallons 2.25 / Imp. Gallons 1.87
Transmission oilU.S. Gallons 0.95 / Imp. Gallons 0.79
TypeSingle cylinder, four stroke
Displacement18.46in / 302,44cc
StartingElectric and kick start (with automatic decompressor)
Water radiator No. 2
TypeWet sump with lobe oil pump and cartridge filter
TypeElectronic, inductive discharge, with adjustable advance (digital control)
Spark plug typeNGK CR9EB
Spark plug gap0.0275in
TypeElectronic injection feed
Brand and typeMikuni D45
TypeWet, multiplate type; hydraulic control
Number of driving discs7
Number of driven discs6
TypeConstant mesh gear type
Number of gears6
Transmission sprocketTeeth 13
Rear wheel sprocketTeeth 40
Manufacturer and typeD.I.D. 520 V6-OR / Regina 135ORC6-OOC (5/8"x¼")
TypeSteel single tube cradle; (round, rectangular and ellipsoidal tubes); rear frame in light alloy
TypeUpside-Down telescopic hydraulic fork with advanced axle; compression and rebound adjustment
Fork legs dia.1.89in
Travel on legs axis11.8in
Front fork manufacturerKayaba
TypeProgressive "Soft Damp" type with single hydraulic shock absorber; spring preload adjustment, compression (double adjustment) and rebound adjustment
Shock absorber manufacturerKayaba
FrontFixed disc, "Wave" type, with hydraulic control and double Ø28 piston floating caliper
Hydraulic control manufacturerBrembo
RearFixed disc, "Wave" type, with hydraulic control and floating caliper
Hydraulic control manufacturerBrembo
Size1.6 x 21"
Size2,15" x 18"
FrontMichelin Enduro Competition 3 / Pirelli MT83 Scorpion
RearMichelin Enduro Competition 3 / Enduro Pirelli MT83 Scorpion
Engine sprocketTeeth 17
Clutch gearTeeth 54
Tail light"LED" type
Battery12V - 7Ah
Timing system Type4 titanium valves, in a radial arrangement, operated through bowls by two overhead camshafts driven by a combined chain/gears system
Auto Insurance Information
State Farm® has offered motorcycle insurance for 40 years
Protection for the Open Road
The open road is always an adventure. You never know what might be around the bend. So make sure you're prepared for whatever the road has in store for you, with a State Farm motorcycle insurance policy.
Motorcycles Covered by State Farm
We will consider any factory-built motorcycle, motorscooter, and other two or three-wheel vehicles including minibikes and trail bikes licensed for use on public roads.
Available Coverage Options
= Bodily injury to someone else or property damage that you accidentally caused while riding your motorcycle. =
= Bodily injury to yourself because of an accident with an uninsured motorist. =
= Damage to your motorcycle caused by an accident. =
= Theft, fire, vandalism, and other losses even while your motorcycle is in storage for the winter. =
= Customization work, such as paint or upgraded components =
= Attached side cars. =
Note: This is only a general description of available coverages and is not a statement of contract. All coverages are subject to policy provisions and applicable endorsements. For further information on motorcycle insurance see a State Farm Agent.